All Technologies FODDER NACHINERY

Bailing machine «FC-20 (50)» is designed for picking rolls of hay of natural and seeding grass, dried grass, hay and haylage, pressing them into cylindrical rolls with further automatic banding with synthetic twine or net (under request of Client).

The rolls are robust, stable during handling. It is hinged to tractor of class drawbar 1.4 and 2 with bi-profile hydraulic system, power shaft, socket for lighting and towing hitch TCU-3К or ТСU-2В (plug).

The control is performed from the panel in tractor cabin. Manometer controls the rolls. Safety factor of drive chains is very high. Bailing machines apply cutting edge technologies of harvesting in any conditions.

Movement on pre-picked roll, spring claws of the machine pick it and transfer in compression box. Press grate pre-pack the roll. Restriction conveyors at the top of pick-up machine restrict the flow to the dimensions of compression box, and feed rake provides further transportation of compressed rolls to press. Bottom rolling press and chains with pins the product is winded in roll that tends more compact as the product is fed. At set compaction signal lamp in tractor cabin is ON. This signal is transmitted from density manometer, and the operator without arresting the assembly turn the regulator on the panel in the position WINDING and continues the movement for about 5 M. Now the cord is pulled into compression bob by roll rotation. Winding unit is available in three versions (winding with single cord, double cord and with net). It is powered by electrical motor form tractor cabin. The cord enters compression box with the product picked by the feeder, captured by the roll and winded on it. After cutting the cord, operator activated hydraulic cylinders to open rare cover of compression box. The rotation of the bottom rolling press the product is unloaded through ramp bar on the soil. The rare cover closes and the assembly moves on the roll, i.e. the process of roll forming is repeated.